Наверх страницы
/ Main page / Pedross / Veneered profiles - Fixing system

Veneered profiles – Fixing system

Clipstar – Fixing system

"Pedross Clipstar" is a technologically unique system of mounting skirting boards to the wall. The protected "Push and Press" mechanism (DGB Registration Nr.202005005425.9) makes the mounting quick and easy. No nail and screw heads, no unsightly gaps. It is possible to lay cables up to 7 mm o (even after initial installation). Easy repeated attachment and detachment of the skirting boards is possible without the need for any tools, for example, if you want to change wall paper or defective wiring. The system can be used for all skirting boards from 40 – 100 mm in height and 14 – 22 mm in thickness.

Make sure:

The fasteners should not press the floor down. See Clipstar – Assembly instruction.

Veneered profiles – Accessories

For the profiles 40 x 22 and 60 x 22 suitable matching corners (inner / outer) and end pieces (left / right) are available for the following wood species: Maple, Steamed Beech, Beech, Cherry, Oak, Walnut, Mahagony, Merbau, Ash, White Ash and Alder.